Objective Questions on Opamp

  1. The opamp can amplify

    Under construction.

  2. In a nonlinear op-amp circuit, the

    Under construction.

  3. The input signal for an instrumentation amplifier usually comes from

    Under construction.

  4. In a differential amplifier, the CMRR is limited mostly by the

    Under construction.

  5. An instrumentation amplifier has a high

    Under construction.

  6. The input offset electric current equals the

    Under construction.

  7. When the two input terminals of a differential amplifier are grounded

    Under construction.

  8. A common - mode signal is applied to

    Under construction.

  9. The common-mode voltage gain is

    Under construction.

  10. The input stage of an op amp is usually a

    Under construction.

  11. The common - mode rejection ratio is

    Under construction.

  12. A 741 C has

    Under construction.

  13. The voltage follower has a

    Under construction.

  14. An opamp has a voltage gain of 200,000. If the output voltage is 1 V, the input voltage is

    Under construction.

  15. The 741 C has a unity - gain frequency of

    Under construction.

  16. The typical input stage of an opamp has a

    Under construction.

  17. The input offset electric current is usually

    Under construction.

  18. With both bases grounded, the only offset that produces an error is the

    Under construction.

  19. The voltage gain of a loaded differential amp is

    Under construction.

  20. At the unity-gain frequency, the open-loop voltage gain is

    Under construction.