• Procedure of Making
• Working Principle
• Chemical Reaction
Battery is generally heavy weight. This is the main disadvantage of using battery as source of energy in different appliances. But there is one new concept of battery which says that, battery can also be light weight if air is used as cathode. One example of the light weight battery is aluminum air battery . Here aluminum is used as anode and air rather oxygen in the air is used as cathode. The energy density i.e. energy produced per unit weight of the battery is very high compared to other conventional battery . But still aluminum air battery is not commercially produced due to high production cost of anode and corrosion of aluminium anode due to carbon dioxide of ambient air. Till date, use of this battery is restricted in military application only. It has high potential of driving electrical vehicle because of its light weight and high energy density. Well known Israeli company "Phinergy" has improved this technology and they are demanding that they will start production of commercially available aluminum air battery for electric vehicles by 2017. We will discuss the matter later in this article, now we will just try to understand how simple is to create an aluminum air battery by using simple household goods.
Aluminum Air Battery Experiment
For creating this experimentally we require,
- Aluminum foil.
- Saturated solution of water and salt
- Bloating papers
- Fine charcoal dust.
- Two small pieces of electric wires and
- One light emitting diode.
Procedure of Making Simple Aluminum Air Battery
Just take a piece of aluminum foil and spread it on a table. In a pot make a saturated solution of water and salt. Take a piece of bloating paper. Get the piece of bloating paper soaked by saturated salt solution. Then get the soaked piece of bloating paper spread over the aluminum foil. Now put some fine dust of charcoal over the bloating paper. After keeping a non-insulated wire lead in the charcoal dust, cover it with another piece of salt solution soaked bloating paper of same size. Now tightly roll the total thing in such a way that, no charcoal dust can touch directly the aluminum foil and insulated portion of the lead wire comes out from one end of the roll. Now take another wire and fix the non insulated portion of the wire to the aluminum foil. Now if we connect a low rated light emitting diode (LED) with these two leads (one from charcoal and other from aluminum foil) and press the roll with our fingers, the LED will glow. This is how an aluminum air battery can be created in our home.
Working Principle of Aluminum Air Battery
As in the figure right, an aluminum air battery has air cathode which may be made of silver based catalyst and it helps to block CO2 to enter in the battery but it allows O2 to enter in the electrolyte. Then this oxygen reacts with H2O in KOH electrolyte solution takes electrons from solution and creates OH- ions. These ions then associate with Al anode and create Al(OH)3 and release electrons. These electrons then flow to the air anode from aluminum cathode through the external circuit for compensating lack of electrons in the electrolyte solution due to cathode reduction reaction.
Chemical Reaction of Aluminum Air Battery
Four aluminum atoms react with 3 oxygen molecules and 6 water molecules and produce 4 aluminium hydroxides
Aluminum Air Battery Equation
The anode oxidation (half-reaction),
The cathode reduction (half-reaction),
Phinergy, a well known Israeli developer company focused on utilization of metal air battery like aluminum air battery and zinc air battery . The specialty of air metal battery is that they take oxygen from ambient air. Aluminum air battery has very high energy density, it is as high as 300 Wh per one ib of aluminum. Its power density is also very high, around 30 Watt/lb.
This type of battery cannot be electrically recharged. Basically this is a primary battery . But the difficulty of recharging can be overcame by mechanical recharging process. Mechanical recharging of aluminum air cell is done by replacing aluminum electrode. In this process, the battery can be turned to its fully charged condition from discharged battery cell stack.
Because of its high energy and power densities, facilities of mechanical recharging, aluminum air battery is may be the most suitable alternative of petroleum fuel for automobile in near future. These battery also have very low environmental impact.
The main disadvantage of this technology is, the reaction of CO2 with aluminum. Aluminum gets very easily affected by corrosion due to the presence of CO2 in the air. This problem can be overcame by introducing special air electrode which can prevent CO2 to reach to the aluminum sheet. Phynergy has developed an air electrode with silver based catalyst and this structure lets O2 enter into aluminum sheet and prevents CO2 to enter.